Fermax Skyline Memokey Keypad Access Control Module

Fermax 7438 Skyline Memokey Keypad Module

The Fermax 7438 is an access control keypad. Users can now open their doors by entering a pre programmed code of up to 6 digits. Its part of the state-of-the-art Skyline range that is highly popular.

The 7438 are designed to fit in with the Skyline range of panels.Once a button on the keypad is pressed an acoustic confirmation tone sounds.

Not only is there acoustic confirmation there is visual too. LEDs will show if a code has been accepted or rejected.

The 7438 has the capacity to register up to 100 different user codes. The chosen codes are all 4 to 6 digits long.

The 7348 features an auxiliary open collector output so it can inform users of a vandalism attempt or if the door is open or been forced.

Open collector outputs have the purpose of signalling, for example, alarming. The keypad electric lock activation time ranges from 1 - 99 seconds.

The 7438 is available for installation either flush mounted in which the device fits perfectly flat into the wall. It is also available surface mounted in which the device is mounted to fit on top of the surface.

Features:

• Code length 4 to 6 digits.
• Up to 100 user codes
• Exit button input.

Technical Specifications:

• Standalone Power supply: 12 Vac/Vdc
• Electric lock release activation by Relay2 A (NA,NC). Programmable 1 to 99 sec. or bistable.
• Free access button (trades) input.
• Open Collector auxiliary output (150 mA max) to indicate sabotage attempt or door open/forced.
• Confirmation by keypad pulsation tone and acceptance or rejection of the code entered.
• Programming from the keypad by master code.
• Consumption: 6 mA (standby), 60 mA (active).
• Protection IPK 536